ODSEVEN Spy Camera for Raspberry Pi Board

This is a teeny tiny camera module for the Raspberry board. The sensor is 5MP!
No adapters required! This camera will plug directly into the Raspberry Pi board camera port!
Want to use this camera but don't have a Raspberry Pi board? 
Simple - We supply adapter cable too. This adapter cable will allow you to plug the ZeroCam into your existing Raspberry Pi 3 (or 2, or B+ or A+!).

Sensor: OV5647, 5MP 2592x1944 pixels
Pin: 22
Peach: 0.5mm
AVDD: 2.7-3.3V (Typical2.8V)
DVDD: 1.45-1.8V
DOVDD: 1.7-3.3V
Lens Structure: 4P (650nm)
EFL: 3.52
FNO: 2.8
Output Format: YUV or RAW RGB
1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
F2.9 lens, 3.60 mm focal length.
53.50 degrees horizontal, 41.41 degrees vertical field of view
Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm

Previous article ODSEVEN A Mass of Raspberry Pi Products Were Ready for Shipment
Next article ODSEVEN Private Customized Aluminum Heatsink Radiator Cooler Kit for Raspberry Pi 3 / 2 /B+

Leave a comment

Comments must be approved before appearing

* Required fields