Odseven WS2812 5050 RGB LED Ring Lamp with Integrated Drivers

SKU: ODS623

Price:
$1.58

Shipping calculated at checkout

Description

Description:
There is one data line with a very specific synchronization protocol.
Since the Protocol is very time sensitive.
This requires a real-time microcontroller such as AVR, rduino, PIC, mbed, etc.
It cannot be used with a Linux-based microcomputer or interpret a microcontroller.
For example, no duduino or basic printing.

Features:
Chip: WS2812 (built-in LED)
LED: 1 pc. 5050 RGB full color backlight
Voltage: 5 V
Ports: Digital
Platform: Arduino microcontroller
Applications :
Full-color module, full-color soft strip light.
LED decorative LED lighting, indoor LED / outdoor LED video wrong screen.
Package includes:
1 x Ring Wall Clock 1 Super Bright WS2812 5050 RGB LED Bulb Panel

Color:RGB

Parameter
Worldsemi LED pixel ring WS2813B
Model: HC-F5V-WS2813-48R
Light source: 5050 RGB LED
IC: WS2813
Led Qty: 1 LED / 8 LEDs / 12LEDs / 16LEDs /24 LEDs
Wave length (NM): R,650nm ; G,520nm ; B,460nm
The gray level: 256
Color: full color (24-bit )
View angle:120°
Voltage: DC 5V
Power: 14.4W
Waterproof: Not waterproof IP20
Dimension: Please refer to the picture
Life span:≥50000hrs

Pin Function:
VCC (Red wire): Power Voltage, connect to “+5V”
DO (Green wire): Control data signal output
DI (Green wire): Control data signal input
BO (Blue wire): Backup control data signal output
BI (Blue wire): Backup control data signal input
GND (White wire): Data &Power Grounding

Technical Features:
1) The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
2) The control circuit and the LED share the only power source.
3) Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.
4) Built-in power-on reset and brown-out reset circuits.
5) Port scanning frequency reaches to 2KHz/s.
6) Serial cascade interface. Data receiving and decoding depend on just one signal line.
7) Dual-signal wires version, signal break-point continuous transmission.
8) If the transmission distance between any two points is less than 3m, another circuit is not needed.
9) When the refresh rate is 30fps, cascade numbers are far more than 1024 points. 10) Data transmitting speed is up to 800Kbps.


Payment & Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed